Galfan Wire (Al5%, Zinc 95%) or (Al10%, Zinc 90%)

Galvanized iron wire, soft annealed, electro galvanized and hot
dipped galvanised, pvc or epoxy coated into colors. Made of high carbon, medium and low carbon steel.

Home >> Products >> Galfan (Al5%,Zinc 95%) and (Al10%,Zinc 90% ) Coated Wire

Galfan Wire

Galfan Wire is actually a special alloy galvanized wire also named as Zn-Al-Alloy Coating Iron Wire. Wire diameter ranges from 1.24mm-5.5mm.

We offer Galfan Wire (Al5%,Zinc 95%) or (Al10%,Zinc 90%) types.

Basic Technical Details:
1.Surface Coating: Galvanizing
2. Features: Galfan wire offers high tensile strength, small tolerance, Shiny surface, good corrosion prevention
3. Packing type:Spool; Coil
4. Application: Galfan wire is used for stranded conductors in overhead power circuitry
5. Remarks during use and handling:
a. During transportation, handle softly and carefully, avoid bumping and damaging the steel wires. Moisture and rain prohibited. Steel wires must be stored in dry and well ventilated indoors
b. Pay attention to the direction of steel wires when paying-off. Be sure the spools or coilis rotationg freely as to achieve identical tension of all the steel wires
c. In case of batch usage, the remaining should be repacked to avoid oxidizing of the surface to guarantee coating

Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:1290~1340Mpa

Specification with Nominal Diameter, Elongation, Strength, Twist:

Nominal Diameter	Tensile Strength	Stress at 1% Elongation	Twist	Elongation	Standard
mm	Mpa	Mpa	Times/360°C	Lo=250mm	As per GB, EN, IEC, JIS, ASTM standard, as well as customer's request
1.24-2.25	≥1340	≥1170	≥18	≥3%
2.25-2.75	≥1310	≥1140	≥16	≥3%
2.75-3.00	≥1310	≥1140	≥16	≥3.5%
3.00-3.50	≥1290	≥1100	≥14	≥3.5%
3.50-4.25	≥1290	≥1100	≥12	≥4%
4.25-4.75	≥1290	≥1100	≥12	≥4%
4.75-5.50	≥1290	≥1100	≥12	≥4%

Quality Standards of Galfan Wire:

(1) Quality : Meet GB/T 343 standard and other requirements of relevant standards .

(2) Zinc Coating: Meet GB/T 15393 standard and other requirements of relevant standards .

(3) Raw Material : Wire rod ——1006 , 1008 , 1018 , Q195 , etc, and zinc with 99.995% purity.

(4) Tensile Strength Range

Size (mm)	Tensile Strength (mpa)
0.15-1.60	290-550
0.65-1.60	400-550
1.61-6.00	400-1200

(5) Application : Used in wire mesh, artware, metal hose, binding for agriculture and construction, etc.

(6) Packing

Size (mm)	Coil Size	Spool Packing	Big Coil Packing
Size (mm)	Coil Size	Spool Packing	ID (mm)	OD (mm)
0.15-0.26	6 inch	1-14kg/spool
0.27-0.60	8 inch	1-100kg/spool
0.61-1.60	12/14/16 inch	1-100kg/spool	250-400	400-770
1.61-6.00		14-500kg/spool	450	800
1.61-6.00		14-500kg/spool	508	840

(7) Zinc Coating

Meet GB/T 15393 standard.

Size (mm)	Weight of Zinc-Coating ( g/m2 )
	A		AB	B	C	D	E	F
	A1	B2
≤0.25			30	20	18
>0.25-0.40				30	25	20
>0.40-0.50					30	20
>0.50-0.60					35	20
>0.60-0.80	120	110			40	20
>0.80-1.00	150	130			45	25
>1.00-1.20	180	150			50	25
>1.20-1.40	200	160			50	25
>1.40-1.60	220	180			50	35	30
>1.60-1.80	220	180			70	40	30
>1.80-2.20	230	200			80	50	40
>2.20-2.50	240	210			80	55	40
>2.50-3.00	250	230			90	70	45
>3.00-4.00	270	250			100	85	60	30
>4.00-5.20	290	270			110	95	70	40
>5.20-6.00	290	270	245		110	100	80	50